Blomberg WNF 5180 WE Instrukcja Użytkownika Strona 3

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 62
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 2
3
EN
temperaturemayfallbelow0ºC.
• Placetheproductatleast1cmawayfromthe
edges of other furniture.
Removing packaging reinforcement
Tiltthemachinebackwardstoremovethepackaging
reinforcement. Remove the packaging reinforcement
bypullingtheribbon.
Removing the transportation locks
A
Donotremovethetransportationlocksbefore
taking out the packaging reinforcement.
A
Removethetransportationsafetyboltsbefore
operating the washing machine, otherwise, the
productwillbedamaged.
1. Loosenalltheboltswithaspanneruntilthey
rotate freely (C).
2. Removetransportationsafetyboltsbyturning
them gently.
3. AttachtheplasticcoverssuppliedintheUser
Manualbagintotheholesontherearpanel.(P)
C
Keepthetransportationsafetyboltsinasafe
place to reuse when the washing machine
needstobemovedagaininthefuture.
C
Never move the product without the
transportationsafetyboltsproperlyfixedin
place!
Connecting water supply
C
Thewatersupplypressurerequiredtorunthe
productisbetween1to10bars(0.1–10MPa).
Itisnecessarytohave10–80litersofwater
flowing from the fully open tap in one minute
to have your machine run smoothly. Attach a
pressure reducing valve if water pressure is
higher.
C
Ifyouaregoingtousethedoublewater-inlet
productasasingle(cold)water-inletunit,you
must install the supplied stopper to the hot
watervalvebeforeoperatingtheproduct.
(Appliesfortheproductssuppliedwithablind
stopper group.)
C
Ifyouwanttousebothwaterinletsofthe
product, connect the hot water hose after
removing the stopper and gasket group from
the hot water valve. (Applies for the products
suppliedwithablindstoppergroup.)
A
Modelswithasinglewaterinletshouldnotbe
connectedtothehotwatertap.Insuchacase
the laundry will get damaged or the product will
switch to protection mode and will not operate.
A
Donotuseoldorusedwaterinlethoseson
thenewproduct.Itmaycausestainsonyour
laundry.
1. Connect the special hoses supplied with the
product to the water inlets on the product. Red
hose(left)(max.90ºC)isforhotwaterinlet,blue
hose(right)(max.25ºC)isforcoldwaterinlet.
A
Ensure that the cold and hot water connections
are made correctly when installing the product.
Otherwise,yourlaundrywillcomeouthotatthe
end of the washing process and wear out.
2. Tightenallhosenutsbyhand.Neverusea
wrench when tightening the nuts.
3. Openthetapscompletelyaftermakingthe
hose connection to check for water leaks at
theconnectionpoints.Ifanyleaksoccur,turn
off the tap and remove the nut. Retighten the
nut carefully after checking the seal. To prevent
waterleakagesanddamagescausedbythem,
keep the taps closed when the machine is not in
use.
Connecting to the drain
• Theendofthedrainhosemustbedirectly
connected to the wastewater drain or to the
washbasin.
A
Yourhousewillbefloodedifthehosecomesout
of its housing during water discharge. Moreover,
there is risk of scalding due to high washing
temperatures! To prevent such situations and to
ensure smooth water intake and discharge of
the machine, fix the end of the discharge hose
tightly so that it cannot come out.
• Thehoseshouldbeattachedtoaheightofat
least 40 cm, and 100 cm at most.
• Incasethehoseiselevatedafterlayingiton
the floor level or close to the ground (less than
40cmabovetheground),waterdischarge
becomesmoredifficultandthelaundrymay
come out excessively wet. Therefore, follow the
heightsdescribedinthefigure.
Przeglądanie stron 2
1 2 3 4 5 6 7 8 ... 61 62

Komentarze do niniejszej Instrukcji

Brak uwag

Epson R320 manuales

Manuales del propietario y guías del usuario para Impresión y escaneo Epson R320.
Ofrecemos 2 manuales en pdf Epson R320 para descargar gratis por tipos de documentos: Guía de inicio rápido






Más productos y manuales para Impresión y escaneo Epson

Modelos Tipo de documento
XP-320 Guia de preparacion    Epson XP-320 Quick Guide and Warranty, 16 paginas
R1900 Guía de inicio rápido   Epson R1900 Start Here Guide, 8 paginas
Perfection 1650 PHOTO Scanner Boletín   Epson Perfection 1650 PHOTO Scanner Product Support Bulletin [no] , 32 paginas
NX515 Guía de inicio rápido   Epson NX515 Quick Guide, 52 paginas
WF-2650 Guía de instalación    Epson WF-2650 Installation Guide, 4 paginas
R2000 Guía de inicio rápido   Epson R2000 Start Here Guide [en] , 4 paginas
C82 Guía de inicio rápido   Epson C82 Start Here Card, 2 paginas
WF-7010 Manual de usuario     Epson WF-7010 Notices and Warranty, 12 paginas
Stylus Color 440 Ink Jet Printer Guía de inicio rápido   Epson Stylus Color 440 Ink Jet Printer Quick Start Guide, 6 paginas
Stylus Pro 10000 Print Engine with Photographic Dye Ink Boletín   Epson Stylus Pro 10000 Print Engine with Photographic Dye Ink Product Support Bulletin, 84 paginas
PictureMate Express Edition Compact Photo Printer Guía de usuario   Epson PictureMate Express Edition Compact Photo Printer Using Guide, 19 paginas
WF-100 Guía de usuario   Epson WF-100 User's Guide, 164 paginas
COLOR 850 Manual de usuario   Epson COLOR 850 User's Manual, 255 paginas
WF-M1560 Guía de inicio rápido    Epson WF-M1560 Quick Guide, 84 paginas
C88+ Guía de inicio rápido   Epson C88+ Quick Reference Guide, 44 paginas
LX-350 Guia de preparacion     Epson LX-350 Setup Guide, 4 paginas
C40S Guía de inicio rápido   Epson C40S Start Here Card [en] , 2 paginas
Artisan 800 All-in-One Printer Guía de instalación   Epson Artisan 800 All-in-One Printer Installation Guide, 28 paginas
Stylus Pro 7800 Manual de usuario   Epson Stylus Pro 7800 User's Manual, 11 paginas
LX-90 Manual de usuario   Epson LX-90 User's Manual, 18 paginas